HS Code 7219Stainless steel; flat-rolled products of width of 600mm or more
14 six-digit codes · Heading 19 of 29 in Chapter 72 · World Customs Organization Harmonized System
HS code 7219 covers flat-rolled stainless steel that is 600mm wide or more, such as wide coils and wide sheets. This page shows how its subheadings split by rolling method and thickness, and how to tell it apart from nearby headings.
Heading 7219 is finely cut: 14 six-digit codes, 721911 to 721990, all of them under “Stainless steel; flat-rolled products of width of 600mm or more”. At that depth it is the exact wording of the code, not of the heading, that settles a classification. The heading is number 19 of 29 in Chapter 72, Iron and steel, which runs to 167 six-digit codes in all.
Six-digit codes under heading 7219
| HS Code | Import–export description |
|---|---|
| 721911 | Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, in coils, of a thickness exceeding 10mm |
| 721912 | Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, in coils, of a thickness of 4.75mm or more but not exceeding 10mm |
| 721913 | Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, in coils, of a thickness of 3mm or more but less than 4.75mm |
| 721914 | Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, in coils, of a thickness of less than 3mm |
| 721921 | Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, (not in coils), of a thickness exceeding 10mm |
| 721922 | Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, (not in coils), of a thickness of 4.75mm or more but not exceeding 10mm |
| 721923 | Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, (not in coils), of a thickness of 3mm or more but less than 4.75mm |
| 721924 | Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, (not in coils), of a thickness of less than 3mm |
| 721931 | Steel, stainless; flat-rolled, width 600mm or more, cold-rolled or cold-reduced, of a thickness of 4.75mm or more |
| 721932 | Steel, stainless; flat-rolled, width 600mm or more, cold-rolled, of a thickness of 3mm or more but less than 4.75mm |
| 721933 | Steel, stainless; flat-rolled, width 600mm or more, cold-rolled, of a thickness exceeding 1mm but less than 3mm |
| 721934 | Steel, stainless; flat-rolled, width 600mm or more, cold-rolled, of a thickness of 0.5mm or more but not exceeding 1mm |
| 721935 | Steel, stainless; flat-rolled, width 600mm or more, cold-rolled, of a thickness of less than 0.5mm |
| 721990 | Steel, stainless; flat-rolled, width 600mm or more, n.e.c. in heading no. 7219 |
What HS code 7219 covers
Heading 7219 is for stainless steel that has been rolled flat and is 600mm wide or more. Width is the first test. If the flat product is narrower than 600mm, it belongs somewhere else.
You may also see it called the HSN code 7219. The first six digits are shared across countries. A country may add more digits after them for its own tariff lines, so always check the national schedule too.
Tariff classification works in steps. You pick the heading first, then the six-digit subheading. Under 7219, the subheadings are split by three things: how the steel was rolled, whether it comes in coils, and how thick it is. The sections below follow that order. For the wider family of iron and steel goods, see the chapter page.
HS code for hot rolled stainless steel coils and flat pieces
Hot-rolled steel is rolled while it is very hot. Under 7219, two groups cover it. One group is for steel wound into coils. The other is for hot-rolled steel that is not in coils, such as cut lengths. Each group uses the same four thickness bands.
Hot-rolled stainless steel in coils:
- 721911: thickness over 10mm
- 721914: less than 3mm
HS code for cold rolled stainless steel 600mm or more
Cold-rolled steel, also called cold-reduced, is rolled again without heat. The cold-rolled group has five thickness bands, and it does not ask whether the steel is in coils:
Cold-rolled stainless steel, 600mm or wider:
- 721933: over 1mm, but less than 3mm
How to choose the right code, and 7219 vs 7220
Use these steps to land on one code. First, check that the steel is stainless. Second, check the width is 600mm or more. Third, decide if it is hot-rolled or cold-rolled. Fourth, for hot-rolled steel, decide if it is in coils or not. Last, measure the thickness and match it to a band.
Code 721990 is the catch-all. It is for stainless flat-rolled steel of 600mm or more that does not fit any code above. Check every other code before you use it.
The neighbouring headings are easy to mix up:
- 7220 is stainless flat-rolled steel with a width under 600mm. Width is the only split from 7219.
- Stainless steel stays in 7219.
- 7208 and 7209 are the non-alloy steel versions, hot-rolled and cold-rolled.
Who imports and exports under HS 7219
Knowing the code is half the job. The other half is finding the companies that trade it. EximDataX shows shipment-level import and export records from official customs sources.
Coverage: 43 direct customs feeds plus 184 mirror-derived countries. Named buyers and named suppliers are available in 38 of the 43 direct markets. Most markets refresh weekly and some refresh daily.
You can search by HS code to see who imports and exports a product, and book a free demo. Use the buyer and supplier pages to start from the companies instead of the code.
Related
- Chapter 72 iron and steel HS codes
- HS 7220 stainless steel flat-rolled under 600mm
- HS 7218 stainless steel ingots and semi-finished
- HS 7225 alloy steel flat-rolled 600mm or more
- HS 7208 hot-rolled non-alloy flat steel
- HS 7209 cold-rolled non-alloy flat steel
- HS 7222 stainless steel bars and sections
- HS code classifier
- Stainless steel import data
- Stainless steel export data
- Find 7219 buyers
- Find 7219 suppliers
- Book a free demo
Nearby headings in Chapter 72
- 7213Iron or non-alloy steel; bars and rods, hot-rolled, in irregularly wound coils4 codes
- 7214Iron or non-alloy steel; bars and rods, not further worked than forged…5 codes
- 7215Iron or non-alloy steel; bars and rods, n.e.c. in chapter 723 codes
- 7216Iron or non-alloy steel, angles, shapes and sections12 codes
- 7217Wire of iron or non-alloy steel4 codes
- 7218Stainless steel in ingots or other primary forms; semi-finished products of…3 codes
- 7220Stainless steel; flat-rolled products of width less than 600mm4 codes
- 7221Stainless steel bars and rods, hot-rolled, in irregularly wound coils1 code
- 7222Stainless steel bars and rods, angles, shapes and sections5 codes
- 7223Stainless steel wire1 code
- 7224Alloy steel in ingots or other primary forms, semi-finished products of other…2 codes
- 7225Alloy steel flat-rolled products, of a width 600mm or more8 codes
Who ships under 7219?
EximDataX tracks the live import–export records filed under this heading and the 14 codes beneath it: named buyers, suppliers, quantities and values from official customs feeds.
Section XV: Base Metals and Articles of Base Metal, chapters 72–83.
HS Code 7219: common questions
What is HS code 7219?
It sits in the iron and steel chapter.
What is the HS code for cold-rolled stainless steel 600mm or wider?
Use 721931 to 721935, chosen by thickness.
What is the HS code for hot-rolled stainless steel coils?
Use 721911 to 721914. They cover hot-rolled stainless steel in coils, split into bands from over 10mm down to less than 3mm.
What is the difference between HS 7219 and 7220?
Width.
Is alloy steel sheet classified under 7219?
No. 7219 is for stainless steel only.
What does code 721990 mean?
Use it only when no other code fits.
See what your buyers are buying.Then decide.
Everything we show you comes from official customs filings — records, not claims. 30 minutes. Your shipment. Your HS code. Real platform. If you don’t see something new about your market by the end of the call, we walk away. No follow-ups.