EximDataX

HS Code 5605Yarn; metallised, whether or not gimped, of textile yarn, or strip or the like of heading no. 5404 or 5405, combined with metal in the form of thread, strip or powder or covered with metal

1 six-digit code · Heading 5 of 9 in Chapter 56 · World Customs Organization Harmonized System

HS code 5605 is the customs heading for metallised yarn, also spelled metallized yarn. It is made by adding metal to textile yarn.

Heading 5605does not subdivide further in the WCO nomenclature: goods answering to “Yarn; metallised, whether or not gimped, of textile yarn, or strip or the like of heading no. 5404 or 5405, combined with metal in the form of thread, strip or powder or covered with metal” classify at the single six-digit code 560500. The heading is number 5 of 9 in Chapter 56, Wadding, felt and nonwovens, special yarns; twine, cordage, ropes and cables and articles thereof, which runs to 30 six-digit codes in all.

Six-digit codes under heading 5605

HS CodeImport–export description
560500Yarn; metallised, whether or not gimped, of textile yarn, or strip or the like of heading no. 5404 or 5405, combined with metal in the form of thread, strip or powder or covered with metal

What HS code 5605 covers: metallised yarn

Metallised yarn is yarn with metal added to it. The metal can be a thread, a strip or a powder. It can also be a thin metal layer on the outside. The base is textile yarn, or a strip of the kind classed in heading 5404 or 5405.

Traders use other names for the same goods. You may hear metal yarn, or textile yarn combined with metal. Indian traders often say HSN code 5605. US traders may say HTS code 5605. All of these point to one heading.

The wording of the heading allows the yarn to be gimped or not. So a metal yarn does not leave this heading just because it has been twisted around another thread. What matters is the metal and the base yarn, not the finish.

How to read the code 560500

A six-digit HS code works like an address. The first two digits give the chapter, which is 56. The first four give the heading, which is 5605. All six give the code, 560500. You may also see it written as 5605.00, with a dot.

Because only one code sits under this heading, there is no choice to make between subheadings at six digits. Your task is simply to decide whether the yarn belongs in the heading at all.

5605 vs 5604, 5606 and 5607: choosing the right heading

Special yarns in Chapter 56 can look alike on a spec sheet. Ask two questions. What is the yarn made of? What has been added to it? Then compare the headings below.

The mix-up people ask about most is 5605 against 5606. If metal is the added part, think 5605. If the goods are gimped yarn, chenille yarn or loop wale-yarn, read the 5606 text next. Metal is not the point of that heading.

Check the exact make-up of the yarn before you pick a code. A small change in what is added can change the heading. If you are unsure, try the HS code classifier, then confirm with your customs broker.

  • 5609: finished articles made from yarn or strip, and rope goods not named elsewhere.

Metallised yarn import and export data

EximDataX shows shipment-level import and export records from official customs sources. Coverage is 43 direct customs feeds plus 184 mirror-derived countries. Named buyers and named suppliers are available in 38 of the 43 direct markets.

Most markets refresh weekly and some refresh daily. You can search by HS code to see who imports and exports a product, and book a free demo.

To see live records for this heading, open the import data or export data pages. To find companies, go to buyer data or supplier data.

Who ships under 5605?

EximDataX tracks the live import–export records filed under this heading and the code beneath it: named buyers, suppliers, quantities and values from official customs feeds.

See live data for 5605

Section XI: Textiles and Textile Articles, chapters 50–63.

Straight answers

HS Code 5605: common questions

What is the HS code for metallised yarn?

Look under heading 5605, which uses the single code 560500. Metallised yarn is the plain name for the goods in it.

What is the difference between 5605 and 5606 gimped yarn?

Heading 5605 is for yarn that has metal added to it. Heading 5606 is for gimped yarn, chenille yarn and loop wale-yarn.

Does metal yarn have subheadings under 5605?

Not at six digits. The world system has only 560500 here. Some countries add more digits for their own use.

Is HS code 5605 the same in every country?

The first six digits are shared. After that, each country may add its own digits, so check your local customs tariff before you file.

How do I confirm the correct code for metal yarn?

Check what the yarn is made of and what has been added. Then use the HS code classifier and ask your customs broker to confirm.

See what your buyers are buying.Then decide.

Everything we show you comes from official customs filings — records, not claims. 30 minutes. Your shipment. Your HS code. Real platform. If you don’t see something new about your market by the end of the call, we walk away. No follow-ups.

Free 3-day test account. No card on file. No funnel email sequence.